RTK F9P Positioning Solutions
  • Introduction
  • What is RTK?
    • GPS Location
  • The RTK Base
    • Choosing a base module
    • Auto conf (QGControl / MP)
    • Configuring the base manually
    • LED Signals
  • The RTK Rover
    • Choosing a rover module
    • Auto conf (QGControl / MP)
    • Configuring the rover manually
  • RTK F9P Drotek Modules
    • DP0601
      • Hardware
        • Drawing
          • V1
          • V1.1
          • V1.2
        • Pinouts
          • V1
          • V1.1
          • V1.2
      • Software
    • Sirius RTK GNSS Base (F9P)
      • Hardware
        • Drawing
        • Pinouts
        • LED Signals
      • Software
    • Sirius RTK GNSS Rover (F9P)
      • Hardware
        • Drawing
        • Pinouts
      • Software
    • DP0602
      • Hardware
        • Drawing
        • Pinouts
      • Software
  • How to get started
    • ZED-F9P RTK configuration
    • Pixhawk 3 PRO (EOLA) integration
    • Telemetry integration
  • Tutorials
    • Set Baudrates
    • Set Nav update rate
    • Set Survey-in time & position accuracy limit
    • Set Fixed LLH or ECEF
    • Change GNSS constellations
    • Updating ZED-F9P Firmware
    • Setup RTK solution using a local network
    • Install U-blox drivers
    • Precise Post Processing (PPP)
  • Frequently Asked Questions
Powered by GitBook
On this page
  • Key design points
  • Mechanical / Electrical / Data
  • I/O Ports

Was this helpful?

  1. RTK F9P Drotek Modules
  2. Sirius RTK GNSS Base (F9P)

Hardware

Key design points

  • Multi‑band RTK with fast convergence times and reliable performance

  • Smallest, lightest, and energy‑efficient RTK module

  • Integrated rechargeable batteries

  • Complete and versatile solution due to base and rover variants

  • Concurrent reception of GPS, GLONASS, Galileo and BeiDou

  • High update rate for highly dynamic applications

  • Centimeter accuracy in a small and energy efficient module

​

Mechanical / Electrical / Data

Size

100 x 100 x 40 (mm)

Weight

310 g

Spacing

hole for mounting pad

Wires

JST-GH 6 pins

Operating T°

-20°C to 60°C

Supply Voltage

5V

Average Current Consumption

50 mA

Logical Level Voltage

3.3V

Input Protocole

RTCM3 UBX NMEA

Output Protocle

RTCM3 UBX NMEA

Logs

UART

I/O Ports

UART

I2C

PreviousSirius RTK GNSS Base (F9P)NextDrawing

Last updated 5 years ago

Was this helpful?